25 PRC

[A-300 Dave]

Has anyone seen any data on the 25 PRC? Seriously considering something in this caliber, but loading data is scarce. Any info will be appreciated. Tnx

 

[Alan]

Not much published yet, most guys are forming loads off PRC parent data and working slow with manuals.

 

[A-300 Dave]

Not much published yet, most guys are forming loads off PRC parent data and working slow with manuals.

Yeah. I've read where they're necking down the 6.5 PRC to form the 25 PRC and using the 140 gr 6.5 PRC load data. Have also read that this 25 PRC is super accurate and a best with wind conditions. 90 - 115 gr bullets seem to be the favorites with the Nosler 115 gr ABLR being THE favorite. I would like to know a little bit more before I make the plunge. Tnx

 

[A-300 Dave]

I ran across this bit of info today. To form the 25 PRC brass neck down 6.5 PRC brass using a Redding Type S bushing 6.5 PRC sizer die with a .284" bushing {.264" (6.5mm) minus .257" (.25 cal) equals .007" reduction} - this should be easy enough!! I'm probably gonna have to add this one to the collection....